Original SATLINK WS-7992 Modulator 2 Route Input Modulator HD DVB-T Modulator RF

New Original SATLINK WS-7992 Modulator 2 Route Input Modulator HD DVB-T Modulator RF

1. High level of integration, high-performance, Full-featured, integrated design
2. 2 route input modulator that converts analogue A/V source to a DVB-T channel
3. Standard COFDM modulation and H.264 encoding
4. Multiple video format compatibility including 576i(PAL) / 480i(NTSC) / 1080p
5. Bandwidth: 6/7/8MHz
6. Frequency range: 50~860MHz
7. Continuously adjustable RF signal output level range 70dBuV from 100dBuV, step 1dBuV
8. 2.4-inch color LCD display
9. Small size and light weight
10. Carriers 2K and 8K
11. User friendly setup and control
12. Compact and wall mountable

Specification:

GUIDE:
1.1 IMPORTANT SAFETY INSTRUCTIONS
Before installation, we would like to remind you some notes, which is very important for operating safely and properly, as follows:
• Be sure to read this user manual before starting your operation.
• When the unit is suddenly moved to a hot area from a cold area, it may cause some problems. In that case, turn off the power, and turn on again after 1-2 hours.
• Keep modulator placed in clean space with sufficient ventilation.
• Do not cover the modulator with or place it on a unit that emits heat.
• Clean the case by a soft cloth with a little washing liquid.
• Do not remove the cover.
• Do not let the unit exposed to extreme heat, cold or humid conditions.
• No liquids or any other materials to come inside of the unit.

1.2 GENERAL DESCRIPTION
WS-7992 is a composite video input standard definition DVB-T 2 route modulator which provides COFDM RF signal in range of 50-860MHz.
It consists of A/D, Coding, Modulation, Frequency conversion which provides bandwidth of 6/7/8MHz to select.
It is designed to achieve CVBS and HDMI input, and it can also supports standard H.264 encoding.
It is an excellent choice to transport video/audio signals from TV satellite receivers, surveillance camera or video/media players to a LCD TV or set-topbox.
It can be used in series with other modulator so the number of channels in the coaxial cable no the SMATV system can be increased as desired.
NOTE:
1.Since the modulator uses H.264 encoding, users need using DVB-T service which supports standard H.264 encoding for normal display.
2.HD program which contains HDCP agreement protection will not play normally, such as Blue-ray Disc and so on. Press RETURN 3 seconds in the boot interface can resolve this problem.
3.If the image and sound are not synchronous, please insert HDMI port again, it will return to normal.
4.The LCD screen will close under no operation after about 1 minute.

Package include:
1 x SATLINK WS-7990 DVB-T Modulator
1 x Power Supply
1 x User Manual