Satlink WS-6918P HIQ 8PSK DVB-S DVB-S2 Satellite Finder
( DVB-S2 & Spectrum & Constellation )
Satlink WS-6918P info:
A battery powered hand held Digital Satellite alignment meter demodulating DVB-S Signal. It's very convenient for installers to catch quick and accurate Alignment for Antenna to the best position.with microprocessor controller, reliable and stable performance. When it's turned on, channel picture, Signal Strength and Signal Quality will be showen on LCD Screen after you set up your local DVB-S Parameter. Also enables you to select big menu window for data figure which is helpful for alignment...
Our Price:
Satlink WS-6918P HIQ 8PSK DVB-S DVB-S2 Satellite Finder Description
*3.5 lnch High Definition TFT LCD Screen
*DVB-S2& DVB-S supported
*8PSK/16PSK Modulation supported
*Real Time Spectrum Analyzer
*Constellation analyzer
*Signal Strength displayed with dB
*Shows CBER,VBER,S/N,C/N、MER.
*Sound and Light Alarm When Lock Signal
*Play Live FTA Channels and Sound
*LED & Audio Indication for Signal Lock
*USB support for SW Upgrade
*Battery Volume Indicator
*Multilanguage OSD
*AV IN for STB、Camera、etc
*AV OUT for External Display TV、etc
LNB/Tuner input:
Connector: F type,male
Frequency range: 950 MHz - 2150 MHz
Signal lever: -65 dB/µV~-25 dB/µV
LNB supply : 13/18 V, max 400 mA
Mode: 13/18 V, max 400 mA2K, 8K
LNB Control: 22 KHz
DiSEqC : Ver. 1.0, 1.1, 1.2 + USALS
Demodulator:
Front End: QPSK
Symbolrate: 2 Mbps~45 Mbps
SCPC and MCPC: Yes
Spectrum Analyzer: NO
System resource:
Processor: 16 bit processor (133MHz)
SDRAM: 4*16 MB
FLASH: 8 MB
EEPROM: 8 MB
Video decoder:
MPEG 2 : Main Proflie@Main Level
Data Rate: up to 15 Mbits/s
Resolution: 720 x 576 (PAL), 720 x 480 (NTSC)
Video Format: PAL / NTSC / SECAM
MPEG Audio:
MPEG 1 layer 1&2
Typ: Mono
Sampling: 32, 44.1 and 48 KHz
Serial data interface:
Connector: USB Type
Power supply:
Li-oN Batteriy: 3000mA/h
Supply Voltage: 8,4 Volt
Charger: 90 - 240 V / AC - 14,5 V / DC 1 A
Physical Specification:
Size: 9,5 x 15,5 x 4,5 cm
Wight: 0,5 Kg
SatLink WS-6918P Software Support Section: ( Free Download )
Secure & Guarantee:
- Brand New, 1 Year Warranty, 30 Days Money Back.
- Our Checkout Process is 100% secure. Your order information is encrypted and transmitted through our secure (SSL) server technology.
- Quality Assurance, 100% quality control assurance. Our SatLink WS-6918P have passed strict quality assurance procedures to achieve international standards such as CE, UL Listed, and/or ISO9001/9002 certification.
- Shopping from us is safe and secure. We do not sell, rent or share information of our customers with other parties. sat-link.com.au guarantee your SatLink WS-6918P transaction will be 100% safe.
- Guard against identity theft. Only authorised personnel are permitted to process your order and handle your personal data.
- Packages arrive safely. For shipment, we take an extra step to protect your packages exclusively.
Sat-Link.com.au: Give you the best quality & service as much as possible!
A satellite finder is a specialized signal-strength meter used to point satellite dishes and LNBs.
There are two general classes of satellite finders: analog and digital satellite finders.
Analog Satellite Finder
Most analog satellite finders are inexpensive devices which simply display the strength of the received signal.
To use an analog satellite finder, you point the satellite dish and LNB to where you believe the satellite to be. You then take a reading on the satellite finder and adjust the satellite dish and LNB until you get the strongest reading possible
Digital Satellite Finder
A digital satellite finder is a significantly more expensive signal strength meter. Digital satellite finders are pre-programmed with the locations of commonly used satellites. With an analog signal finder, you can only know that you have found a satellite. With a digital satellite finder, you can know which satellite you have found.
ws_9618P_manual.pdf free download
cd_6918P.rar free download
